{"id":-2137941617,"chronicle_id":"0900c8af8091998f","project_document_id":"0800c8af80919995","fk_document_type":4,"document_type":"diag:servinfosub","vcc_number":"VCC-108477-1","nevis_id":"0900c8af8091998f","path":"VCC-108477-1\\0900c8af8091998f_ru-RU.xml","title":"Signal faulty","xml_filename":"0900c8af8091998f_ru-RU.xml","description_raw":"<?xml version=\"1.0\" encoding=\"utf-8\"?><servinfosub docno=\"VCC-108477\" id=\"KC02508168\" xml:lang=\"ru-RU\" IE-ID=\"ru-RU0900c8af8091998f\"><title><phrase category=\"\" id=\"KC06639584\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6df\">Signal faulty </phrase></title><diagnostic type=\"test\"><testgrp id=\"KC02515423\" j2008use=\"1\" paperuse=\"1\" resumable=\"1\" screenuse=\"1\" testgrp-id=\"ADB1\" x=\"120\" y=\"80\" IE-ID=\"ru-RU0900c8af8091998f_KC02515423\"><title><phrase category=\"\" id=\"KC06639585\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6e0\">Checking throttle position (TP) sensor function</phrase></title><node><test1><diaglist><dgraphic><dgraphic1><graphic id=\"KC06639586\"><href title=\"A3000040\">0900c8af80054d55_0_0.gif</href></graphic></dgraphic1></dgraphic><ditem><ptxt><phrase category=\"\" id=\"KC06639587\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6e1\">Ignition on.</phrase></ptxt></ditem></diaglist><test2><para><ptxt><phrase category=\"\" id=\"KC06639588\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6e2\">Read off throttle position (TP) sensor voltage.</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639589\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6e3\">The value of THROT POT should be approximately 0.5-0.8 V and the value of IDLE SW should be ON when the accelerator pedal (AP) is in its highest position.</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639590\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6a9\">The value of THROT POT V should be 4.5-5.1 V when the accelerator pedal (AP) is in its lowest position and the value of IDLE SW should be OFF.</phrase></ptxt></para><diaglist><dgraphic><dgraphic2><graphic id=\"KC06639591\"><href title=\"A0801035\">0900c8af800547da_0_0.gif</href></graphic><smarttool active=\"press\" id=\"KC06639592\" toolname=\"XF13A516\"><href title=\"XF13A516, Spjall+Tomg.\">0800c8af804caa11</href></smarttool></dgraphic2></dgraphic><ditem><ditemtext><ptxt><phrase category=\"\" id=\"KC06639593\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6aa\"></phrase></ptxt></ditemtext></ditem><ditem><ditemtext><ptxt><phrase category=\"\" id=\"KC06639594\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6ab\"></phrase></ptxt></ditemtext></ditem></diaglist></test2></test1><question>Are these values OK?</question><resact-grp><result button=\"yes\" comp=\"button\" highlight=\"0\"></result><action j2008use=\"1\" paperuse=\"1\" screenuse=\"1\"><ptxt><xref><ref id=\"KC06639595\"><href title=\"Intermittent fault\">ru-RU0900c8af8091998f#KC02515428</href></ref></xref></ptxt></action></resact-grp><resact-grp><result button=\"no\" comp=\"button\" highlight=\"0\"></result><action j2008use=\"1\" paperuse=\"1\" screenuse=\"1\"><ptxt><xref><ref id=\"KC06639596\"><href title=\"Checking connectors\">ru-RU0900c8af8091998f#KC02515424</href></ref></xref></ptxt></action></resact-grp></node></testgrp><testgrp id=\"KC02515424\" j2008use=\"1\" paperuse=\"1\" resumable=\"1\" screenuse=\"1\" testgrp-id=\"ADB2\" x=\"120\" y=\"80\"><title><phrase category=\"\" id=\"KC06639597\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6ac\">Checking connectors</phrase></title><node><test1><diaglist><dgraphic><dgraphic1><graphic id=\"KC06639598\"><href title=\"A3000040\">0900c8af80054d55_0_0.gif</href></graphic></dgraphic1></dgraphic><ditem><ptxt><phrase category=\"\" id=\"KC06639599\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6ad\">Ignition off.</phrase></ptxt></ditem><ditem><ptxt><phrase category=\"\" id=\"KC06639600\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6ae\">Check control module and throttle position (TP) sensor connectors for contact resistance and oxidation and remedy according to <xref><ref id=\"KC06639601\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106363</href></ref></xref>.</phrase></ptxt></ditem><ditem><ptxt><phrase category=\"\" id=\"KC06639602\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6af\">Ignition on.</phrase></ptxt></ditem></diaglist><test2><para><ptxt><phrase category=\"\" id=\"KC06639603\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b0\">Read off throttle position (TP) sensor voltage.</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639604\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b1\">The value of THROT POT should be approximately 0.5-0.8 V and the value of IDLE SW should be ON when the accelerator pedal (AP) is in its highest position.</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639605\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b2\">The value of THROT POT V should be 4.5-5.1 V when the accelerator pedal (AP) is in its lowest position and the value of IDLE SW should be OFF.</phrase></ptxt></para><list1 enumtype=\"d\" type=\"unordered\"><title><phrase category=\"\" id=\"KC06639606\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b3\">Other information:</phrase></title><item><ptxt><phrase category=\"\" id=\"KC06639607\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b4\">To access the control module/connect the breakout box, see <xref><ref id=\"KC06639608\"><href title=\"VCC-087210-1, Подсоединение измерительного блока\">ru-RU0900c8af8049e25d#KC01395794</href></ref></xref>.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639609\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b5\">To access/replace the throttle position (TP) sensor, see <xref><ref id=\"KC06639610\"><href title=\"Invalid virgin link from Nevis\">ru-RU0900c8af804a092d#KC01476481</href></ref></xref>.</phrase></ptxt></item></list1><diaglist><dgraphic><dgraphic2><graphic id=\"KC06639611\"><href title=\"A0801035\">0900c8af800547da_0_0.gif</href></graphic><smarttool active=\"press\" id=\"KC06639612\" toolname=\"XF13A516\"><href title=\"XF13A516, Spjall+Tomg.\">0800c8af804caa11</href></smarttool></dgraphic2></dgraphic><ditem><ditemtext><ptxt><phrase category=\"\" id=\"KC06639613\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b6\"></phrase></ptxt></ditemtext></ditem><ditem><ditemtext><ptxt><phrase category=\"\" id=\"KC06639614\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b7\"></phrase></ptxt></ditemtext></ditem></diaglist></test2></test1><question>Are these values OK?</question><resact-grp><result button=\"yes\" comp=\"button\" highlight=\"0\"></result><action j2008use=\"1\" paperuse=\"1\" screenuse=\"1\"><return value=\"FAULT FOUND\"></return></action></resact-grp><resact-grp><result button=\"no\" comp=\"button\" highlight=\"0\"></result><action j2008use=\"1\" paperuse=\"1\" screenuse=\"1\"><ptxt><xref><ref id=\"KC06639615\"><href title=\"Checking components and cables\">ru-RU0900c8af8091998f#KC02515425</href></ref></xref></ptxt></action></resact-grp></node></testgrp><testgrp id=\"KC02515425\" j2008use=\"1\" paperuse=\"1\" resumable=\"1\" screenuse=\"1\" testgrp-id=\"ADB3\" x=\"120\" y=\"240\"><title><phrase category=\"\" id=\"KC06639616\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b8\">Checking components and cables</phrase></title><node><test1><test2><para><ptxt><phrase category=\"\" id=\"KC06639617\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6b9\">Check throttle position (TP) sensor resistance. For resistance values refer to <xref><ref id=\"KC06639618\"><href title=\"VCC-087581-1, Сопротивление компонентов\">ru-RU0900c8af8049e5fb#KC01395805</href></ref></xref>.</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639619\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6ba\">Check cable between control module #D12 and throttle position (TP) sensor #1 for an open-circuit according to <xref><ref id=\"KC06639620\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106360</href></ref></xref>.</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639621\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6bb\">Check cables between:</phrase></ptxt></para><list1 enumtype=\"d\"><item><ptxt><phrase category=\"\" id=\"KC06639622\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6bc\">control module #D1 and throttle position (TP) sensor #4</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639623\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6bd\">control module #D20 and throttle position (TP) sensor #3</phrase></ptxt></item></list1><para><ptxt><phrase category=\"\" id=\"KC06639624\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6be\">for an open circuit as described in <xref><ref id=\"KC06639625\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106360</href></ref></xref>, a short circuit to ground as described in <xref><ref id=\"KC06639626\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106352</href></ref></xref>, and a short circuit to voltage supply as described in <xref><ref id=\"KC06639627\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106854</href></ref></xref>. </phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639628\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6bf\">Check cable between control module #D17 and throttle position (TP) sensor #2 for a short-circuit to ground according to <xref><ref id=\"KC06639629\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106352</href></ref></xref> and a short-circuit to supply voltage according to <xref><ref id=\"KC06639630\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106854</href></ref></xref> .</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639631\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c0\">Remedy as necessary.</phrase></ptxt></para><list1 enumtype=\"d\" type=\"unordered\"><title><phrase category=\"\" id=\"KC06639632\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c1\">Other information:</phrase></title><item><ptxt><phrase category=\"\" id=\"KC06639633\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c2\">To access the control module/connect the breakout box, see <xref><ref id=\"KC06639634\"><href title=\"VCC-087210-1, Подсоединение измерительного блока\">ru-RU0900c8af8049e25d#KC01395794</href></ref></xref>.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639635\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c3\">To access/replace the throttle position sensor, see <xref><ref id=\"KC06639636\"><href title=\"VCC-110300-1, Replacing throttle position (TP) sensor\">ru-RU0900c8af808e67e4#KC02408942</href></ref></xref>. </phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639637\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c4\">With the ignition on and the throttle position (TP) sensor connector disconnected the voltage between throttle position (TP) sensor connector:</phrase></ptxt></item><list2 enumtype=\"d\"><item><ptxt><phrase category=\"\" id=\"KC06639638\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c5\">#4 (engine control module (ECM) side) and ground should be 4.8-5.2 V.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639639\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c6\">#2 (engine control module (ECM) side) and ground should be less than approximately 5.0 V.</phrase></ptxt></item></list2><item><ptxt><phrase category=\"\" id=\"KC06639640\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c7\">With the ignition off and throttle position (TP) sensor connector disconnected the resistance between throttle position (TP) sensor connector #1 (engine control module (ECM) side) and ground should be approximately 0 Ω.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639641\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c8\">For other values, see <xref><ref id=\"KC06639642\"><href title=\"VCC-087043-1, Разъем А\">ru-RU0900c8af8049e041#KC01395823</href></ref></xref>,<xref><ref id=\"KC06639643\"><href title=\"VCC-087050-1, Разъем В\">ru-RU0900c8af8049e04e#KC01395825</href></ref></xref> , <xref><ref id=\"KC06639644\"><href title=\"VCC-087053-1, Разъем C\">ru-RU0900c8af8049e06b#KC01395827</href></ref></xref> and <xref><ref id=\"KC06639645\"><href title=\"VCC-087054-1, Разъем D\">ru-RU0900c8af8049e076#KC01395829</href></ref></xref>.</phrase></ptxt></item></list1><diaglist><dgraphic><dgraphic1><graphic id=\"KC06639646\"><href title=\"H3701370\">0900c8af80124eb4_0_0.gif</href></graphic></dgraphic1><dgraphic2><graphic id=\"KC06639647\"><href title=\"A3000036\">0900c8af80054d47_0_0.gif</href></graphic><smarttool active=\"press\" id=\"KC06639648\" toolname=\"ODAH\"><href title=\"ODAH, \">0800c8af80070d96</href></smarttool></dgraphic2></dgraphic><ditem><ditemtext><ptxt><phrase category=\"\" id=\"KC06639649\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6c9\"></phrase></ptxt></ditemtext></ditem></diaglist><grate><graphic id=\"KC06639650\"><href title=\"H3701388\">0900c8af80124ed7_0_0.gif</href></graphic></grate></test2></test1><question>Select Continue when the fault has been remedied.</question><resact-grp><result button=\"cont\" comp=\"button\" highlight=\"0\"></result><action j2008use=\"1\" paperuse=\"1\" screenuse=\"1\"><ptxt><xref><ref id=\"KC06639651\"><href title=\"Verification\">ru-RU0900c8af8091998f#KC02515426</href></ref></xref></ptxt></action></resact-grp></node></testgrp><testgrp id=\"KC02515426\" j2008use=\"1\" paperuse=\"1\" resumable=\"1\" screenuse=\"1\" testgrp-id=\"VERIA\" x=\"360\" y=\"160\"><title><phrase category=\"\" id=\"KC06639652\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6ca\">Verification</phrase></title><subcalloutnode><diagcallout><xref><ref id=\"KC06639653\"><href title=\"VCC-108478-1, Verification\">ru-RU0900c8af808ec484#KC02453339</href></ref></xref></diagcallout><rescall-grp><result comp=\"string\" highlight=\"0\" op=\"eq\" return=\"VERIFIED\"></result><calloutaction><return value=\"FAULT FOUND\"></return></calloutaction></rescall-grp><rescall-grp><result comp=\"string\" highlight=\"0\" op=\"eq\" return=\"VERIFICATION FAILED\"></result><calloutaction><ptxt><xref><ref id=\"KC06639654\"><href title=\"Fault-tracing information\">ru-RU0900c8af8091998f#KC02515427</href></ref></xref></ptxt></calloutaction></rescall-grp><rescall-grp><result comp=\"string\" highlight=\"0\" op=\"eq\" return=\"PAPER\"></result><calloutaction><return value=\"FAULT NOT FOUND\"></return></calloutaction></rescall-grp></subcalloutnode></testgrp><testgrp id=\"KC02515427\" j2008use=\"1\" paperuse=\"0\" resumable=\"1\" screenuse=\"1\" testgrp-id=\"INFO1\" x=\"600\" y=\"160\"><title><phrase category=\"\" id=\"KC06639655\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6cb\">Fault-tracing information</phrase></title><subcalloutnode><diagcallout><xref><ref id=\"KC06639656\"><href title=\"VCC-002087-1, Информация\">ru-RU0900c8af8006ff94#KC01106273</href></ref></xref></diagcallout><rescall-grp><result comp=\"string\" highlight=\"0\" op=\"eq\" return=\"FAULTTRACING FAILED\"></result><calloutaction><return value=\"FAULTTRACING FAILED\"></return></calloutaction></rescall-grp><rescall-grp><result comp=\"string\" highlight=\"0\" op=\"eq\" return=\"NEW TRY\"></result><calloutaction><ptxt><xref><ref id=\"KC06639657\"><href title=\"Checking throttle position (TP) sensor function\">ru-RU0900c8af8091998f#KC02515423</href></ref></xref></ptxt></calloutaction></rescall-grp></subcalloutnode></testgrp><testgrp id=\"KC02515428\" j2008use=\"1\" paperuse=\"1\" resumable=\"1\" screenuse=\"1\" testgrp-id=\"INTNODE\" x=\"360\" y=\"80\"><title><phrase category=\"\" id=\"KC06639658\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6cc\">Intermittent fault</phrase></title><node><test1><test2><para><ptxt><phrase category=\"\" id=\"KC06639659\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6cd\">Check throttle position (TP) sensor and control module connectors for loose connections according to <xref><ref id=\"KC06639660\"><href title=\"VCC-018854-1, Проверка проводки и выводов. Неустойчивые неисправности\">ru-RU0900c8af80854dc2#KC01106832</href></ref></xref> , and for contact resistance and oxidation according to <xref><ref id=\"KC06639661\"><href title=\"VCC-018854-1, Проверка проводки и выводов. Неустойчивые неисправности\">ru-RU0900c8af80854dc2#KC01108670</href></ref></xref> .</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639662\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6ce\">Check cable between throttle position (TP) sensor connector and control module #D12 and throttle position (TP) sensor #1 for an open-circuit according to <xref><ref id=\"KC06639663\"><href title=\"VCC-018853-1, Проверка проводки и выводов. Постоянные неисправности\">ru-RU0900c8af80be4147#KC01106360</href></ref></xref>.</phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639664\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d0\">Check cables between:</phrase></ptxt></para><list1 enumtype=\"d\"><item><ptxt><phrase category=\"\" id=\"KC06639665\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d1\">control module #D1 and throttle position (TP) sensor #4</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639666\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d2\">control module #D20 and throttle position (TP) sensor #3</phrase></ptxt></item></list1><para><ptxt><phrase category=\"\" id=\"KC06639667\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d3\">for an open circuit as described in <xref><ref id=\"KC06639668\"><href title=\"VCC-018854-1, Проверка проводки и выводов. Неустойчивые неисправности\">ru-RU0900c8af80854dc2#KC01108668</href></ref></xref> , a short circuit to ground as described in <xref><ref id=\"KC06639669\"><href title=\"VCC-018854-1, Проверка проводки и выводов. Неустойчивые неисправности\">ru-RU0900c8af80854dc2#KC01107969</href></ref></xref>, and a short circuit to voltage supply as described in <xref><ref id=\"KC06639670\"><href title=\"VCC-018854-1, Проверка проводки и выводов. Неустойчивые неисправности\">ru-RU0900c8af80854dc2#KC01109330</href></ref></xref>. </phrase></ptxt></para><para><ptxt><phrase category=\"\" id=\"KC06639671\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d4\">Check cable between control module #D17 and throttle position (TP) sensor #2 for a short-circuit to ground according to <xref><ref id=\"KC06639672\"><href title=\"VCC-018854-1, Проверка проводки и выводов. Неустойчивые неисправности\">ru-RU0900c8af80854dc2#KC01107969</href></ref></xref> and a short-circuit to supply voltage according to <xref><ref id=\"KC06639673\"><href title=\"VCC-018854-1, Проверка проводки и выводов. Неустойчивые неисправности\">ru-RU0900c8af80854dc2#KC01109330</href></ref></xref> .</phrase></ptxt></para><list1 enumtype=\"d\" type=\"unordered\"><title><phrase category=\"\" id=\"KC06639674\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d5\">Other information:</phrase></title><item><ptxt><phrase category=\"\" id=\"KC06639675\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d6\">To access the control module/connect the breakout box, see <xref><ref id=\"KC06639676\"><href title=\"VCC-087210-1, Подсоединение измерительного блока\">ru-RU0900c8af8049e25d#KC01395794</href></ref></xref>.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639677\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d7\">To access/replace the throttle position (TP) sensor, see <xref><ref id=\"KC06639678\"><href title=\"Invalid virgin link from Nevis\">ru-RU0900c8af804a092d#KC01476481</href></ref></xref>.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639679\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d8\">With the ignition on and the throttle position (TP) sensor connector disconnected the voltage between throttle position (TP) sensor connector:</phrase></ptxt></item><list2 enumtype=\"d\"><item><ptxt><phrase category=\"\" id=\"KC06639680\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6d9\">#4 (engine control module (ECM) side) and ground should be 4.8-5.2 V.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639681\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6da\">#2 (engine control module (ECM) side) and ground should be less than approximately 5.0 V.</phrase></ptxt></item></list2><item><ptxt><phrase category=\"\" id=\"KC06639682\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6db\">With the ignition off and throttle position (TP) sensor connector disconnected the resistance between throttle position (TP) sensor connector #1 (engine control module (ECM) side) and ground should be approximately 0 Ω.</phrase></ptxt></item><item><ptxt><phrase category=\"\" id=\"KC06639683\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6dc\">For other values, see <xref><ref id=\"KC06639684\"><href title=\"VCC-087043-1, Разъем А\">ru-RU0900c8af8049e041#KC01395823</href></ref></xref>,<xref><ref id=\"KC06639685\"><href title=\"VCC-087050-1, Разъем В\">ru-RU0900c8af8049e04e#KC01395825</href></ref></xref> , <xref><ref id=\"KC06639686\"><href title=\"VCC-087053-1, Разъем C\">ru-RU0900c8af8049e06b#KC01395827</href></ref></xref> and <xref><ref id=\"KC06639687\"><href title=\"VCC-087054-1, Разъем D\">ru-RU0900c8af8049e076#KC01395829</href></ref></xref>.</phrase></ptxt></item></list1><diaglist><dgraphic><dgraphic1><graphic id=\"KC06639688\"><href title=\"H3701370\">0900c8af80124eb4_0_0.gif</href></graphic></dgraphic1><dgraphic2><graphic id=\"KC06639689\"><href title=\"A3000036\">0900c8af80054d47_0_0.gif</href></graphic><smarttool active=\"press\" id=\"KC06639690\" toolname=\"ODAH\"><href title=\"ODAH, \">0800c8af80070d96</href></smarttool></dgraphic2></dgraphic><ditem><ditemtext><ptxt><phrase category=\"\" id=\"KC06639691\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6dd\"></phrase></ptxt></ditemtext></ditem></diaglist><grate><graphic id=\"KC06639692\"><href title=\"H3701388\">0900c8af80124ed7_0_0.gif</href></graphic></grate></test2></test1><question>Select Continue when the fault has been remedied.</question><resact-grp><result button=\"cont\" comp=\"button\" highlight=\"0\"></result><action j2008use=\"1\" paperuse=\"0\" screenuse=\"1\"><ptxt><xref><ref id=\"KC06639693\"><href title=\"Fault-tracing information\">ru-RU0900c8af8091998f#KC02515429</href></ref></xref></ptxt></action><action j2008use=\"0\" paperuse=\"1\" screenuse=\"0\"><return value=\"DONE\"></return></action></resact-grp></node></testgrp><testgrp id=\"KC02515429\" j2008use=\"1\" paperuse=\"0\" resumable=\"1\" screenuse=\"1\" testgrp-id=\"INFO2\" x=\"600\" y=\"80\"><title><phrase category=\"\" id=\"KC06639694\" phrase-urn=\"urn:x-nevis:phrase:0800c8af8198d6de\">Fault-tracing information</phrase></title><subcalloutnode><diagcallout><xref><ref id=\"KC06639695\"><href title=\"VCC-002101-1, Информация\">ru-RU0900c8af8006ff9e#KC01107005</href></ref></xref></diagcallout><rescall-grp><result comp=\"string\" highlight=\"0\" op=\"eq\" return=\"NEW TRY\"></result><calloutaction><ptxt><xref><ref id=\"KC06639696\"><href title=\"Checking throttle position (TP) sensor function\">ru-RU0900c8af8091998f#KC02515423</href></ref></xref></ptxt></calloutaction></rescall-grp><rescall-grp><result comp=\"string\" highlight=\"0\" op=\"eq\" return=\"FAULT FOUND\"></result><calloutaction><return value=\"DONE\"></return></calloutaction></rescall-grp></subcalloutnode></testgrp></diagnostic></servinfosub>","description_plain":"Signal faulty\nChecking throttle position (TP) sensor function\nIgnition on.\nRead off throttle position (TP) sensor voltage.\nThe value of THROT POT should be approximately 0.5-0.8 V and the value of IDLE SW should be ON when the accelerator pedal (AP) is in its highest position.\nThe value of THROT POT V should be 4.5-5.1 V when the accelerator pedal (AP) is in its lowest position and the value of IDLE SW should be OFF.\nAre these values OK?\nru-RU0900c8af8091998f#KC02515428\nru-RU0900c8af8091998f#KC02515424\nChecking connectors\nIgnition off.\nCheck control module and throttle position (TP) sensor connectors for contact resistance and oxidation and remedy according to ru-RU0900c8af80be4147#KC01106363.\nOther information:\nTo access the control module/connect the breakout box, see ru-RU0900c8af8049e25d#KC01395794.\nTo access/replace the throttle position (TP) sensor, see ru-RU0900c8af804a092d#KC01476481.\nru-RU0900c8af8091998f#KC02515425\nChecking components and cables\nCheck throttle position (TP) sensor resistance. For resistance values refer to ru-RU0900c8af8049e5fb#KC01395805.\nCheck cable between control module #D12 and throttle position (TP) sensor #1 for an open-circuit according to ru-RU0900c8af80be4147#KC01106360.\nCheck cables between:\ncontrol module #D1 and throttle position (TP) sensor #4\ncontrol module #D20 and throttle position (TP) sensor #3\nfor an open circuit as described in ru-RU0900c8af80be4147#KC01106360, a short circuit to ground as described in ru-RU0900c8af80be4147#KC01106352, and a short circuit to voltage supply as described in ru-RU0900c8af80be4147#KC01106854.\nCheck cable between control module #D17 and throttle position (TP) sensor #2 for a short-circuit to ground according to ru-RU0900c8af80be4147#KC01106352 and a short-circuit to supply voltage according to ru-RU0900c8af80be4147#KC01106854 .\nRemedy as necessary.\nTo access/replace the throttle position sensor, see ru-RU0900c8af808e67e4#KC02408942.\nWith the ignition on and the throttle position (TP) sensor connector disconnected the voltage between throttle position (TP) sensor connector:\n#4 (engine control module (ECM) side) and ground should be 4.8-5.2 V.\n#2 (engine control module (ECM) side) and ground should be less than approximately 5.0 V.\nWith the ignition off and throttle position (TP) sensor connector disconnected the resistance between throttle position (TP) sensor connector #1 (engine control module (ECM) side) and ground should be approximately 0 Ω.\nFor other values, see ru-RU0900c8af8049e041#KC01395823,ru-RU0900c8af8049e04e#KC01395825 , ru-RU0900c8af8049e06b#KC01395827 and ru-RU0900c8af8049e076#KC01395829.\nSelect Continue when the fault has been remedied.\nru-RU0900c8af8091998f#KC02515426\nVerification\nru-RU0900c8af8091998f#KC02515427\nFault-tracing information\nru-RU0900c8af8091998f#KC02515423\nIntermittent fault\nCheck throttle position (TP) sensor and control module connectors for loose connections according to ru-RU0900c8af80854dc2#KC01106832 , and for contact resistance and oxidation according to ru-RU0900c8af80854dc2#KC01108670 .\nCheck cable between throttle position (TP) sensor connector and control module #D12 and throttle position (TP) sensor #1 for an open-circuit according to ru-RU0900c8af80be4147#KC01106360.\nfor an open circuit as described in ru-RU0900c8af80854dc2#KC01108668 , a short circuit to ground as described in ru-RU0900c8af80854dc2#KC01107969, and a short circuit to voltage supply as described in ru-RU0900c8af80854dc2#KC01109330.\nCheck cable between control module #D17 and throttle position (TP) sensor #2 for a short-circuit to ground according to ru-RU0900c8af80854dc2#KC01107969 and a short-circuit to supply voltage according to ru-RU0900c8af80854dc2#KC01109330 .\nru-RU0900c8af8091998f#KC02515429","description_markdown":"# Signal faulty\n\nSignal faulty\n\nChecking throttle position (TP) sensor function\n\nIgnition on.\n\nRead off throttle position (TP) sensor voltage.\n\nThe value of THROT POT should be approximately 0.5-0.8 V and the value of IDLE SW should be ON when the accelerator pedal (AP) is in its highest position.\n\nThe value of THROT POT V should be 4.5-5.1 V when the accelerator pedal (AP) is in its lowest position and the value of IDLE SW should be OFF.\n\n## Вопрос\n\nAre these values OK?\n\nru-RU0900c8af8091998f#KC02515428\n\nru-RU0900c8af8091998f#KC02515424\n\nChecking connectors\n\nIgnition off.\n\nCheck control module and throttle position (TP) sensor connectors for contact resistance and oxidation and remedy according to ru-RU0900c8af80be4147#KC01106363.\n\nOther information:\n\nTo access the control module/connect the breakout box, see ru-RU0900c8af8049e25d#KC01395794.\n\nTo access/replace the throttle position (TP) sensor, see ru-RU0900c8af804a092d#KC01476481.\n\n## Вопрос\n\nAre these values OK?\n\nru-RU0900c8af8091998f#KC02515425\n\nChecking components and cables\n\nCheck throttle position (TP) sensor resistance. For resistance values refer to ru-RU0900c8af8049e5fb#KC01395805.\n\nCheck cable between control module #D12 and throttle position (TP) sensor #1 for an open-circuit according to ru-RU0900c8af80be4147#KC01106360.\n\nCheck cables between:\n\ncontrol module #D1 and throttle position (TP) sensor #4\n\ncontrol module #D20 and throttle position (TP) sensor #3\n\nfor an open circuit as described in ru-RU0900c8af80be4147#KC01106360, a short circuit to ground as described in ru-RU0900c8af80be4147#KC01106352, and a short circuit to voltage supply as described in ru-RU0900c8af80be4147#KC01106854.\n\nCheck cable between control module #D17 and throttle position (TP) sensor #2 for a short-circuit to ground according to ru-RU0900c8af80be4147#KC01106352 and a short-circuit to supply voltage according to ru-RU0900c8af80be4147#KC01106854 .\n\nRemedy as necessary.\n\nTo access/replace the throttle position sensor, see ru-RU0900c8af808e67e4#KC02408942.\n\nWith the ignition on and the throttle position (TP) sensor connector disconnected the voltage between throttle position (TP) sensor connector:\n\n#4 (engine control module (ECM) side) and ground should be 4.8-5.2 V.\n\n#2 (engine control module (ECM) side) and ground should be less than approximately 5.0 V.\n\nWith the ignition off and throttle position (TP) sensor connector disconnected the resistance between throttle position (TP) sensor connector #1 (engine control module (ECM) side) and ground should be approximately 0 Ω.\n\nFor other values, see ru-RU0900c8af8049e041#KC01395823,ru-RU0900c8af8049e04e#KC01395825 , ru-RU0900c8af8049e06b#KC01395827 and ru-RU0900c8af8049e076#KC01395829.\n\n## Вопрос\n\nSelect Continue when the fault has been remedied.\n\nru-RU0900c8af8091998f#KC02515426\n\nVerification\n\nru-RU0900c8af8091998f#KC02515427\n\nFault-tracing information\n\nru-RU0900c8af8091998f#KC02515423\n\nIntermittent fault\n\nCheck throttle position (TP) sensor and control module connectors for loose connections according to ru-RU0900c8af80854dc2#KC01106832 , and for contact resistance and oxidation according to ru-RU0900c8af80854dc2#KC01108670 .\n\nCheck cable between throttle position (TP) sensor connector and control module #D12 and throttle position (TP) sensor #1 for an open-circuit according to ru-RU0900c8af80be4147#KC01106360.\n\nfor an open circuit as described in ru-RU0900c8af80854dc2#KC01108668 , a short circuit to ground as described in ru-RU0900c8af80854dc2#KC01107969, and a short circuit to voltage supply as described in ru-RU0900c8af80854dc2#KC01109330.\n\nCheck cable between control module #D17 and throttle position (TP) sensor #2 for a short-circuit to ground according to ru-RU0900c8af80854dc2#KC01107969 and a short-circuit to supply voltage according to ru-RU0900c8af80854dc2#KC01109330 .\n\n## Вопрос\n\nSelect Continue when the fault has been remedied.\n\nru-RU0900c8af8091998f#KC02515429","xml_size":3230}